[ Home ] [ Heating Products ] [ About Summit Dynamics ] [ Engineering ] [ Blowers and Air Knives ] [ Manufacturers ] [ Technical Info ] [ Contact SDI ]

[ Thermocouples & RTDs ] [ Power Control ] [ Heaters ] [ Signal Converter ] [ Bargain Products ] [ Temperature Control ] [ Accessories ] [ Osram Sylvania Air Heaters ]

Osram Sylvania manufactures a line of high quality air / gas heaters.  At the core of each Osram Sylvania air heater are serpentine elements designed for efficient transfer of energy from the heater to the gas stream passing through the heater.  The result is compact and efficient air heaters that respond rapidly and maintain steady temperature. 

With proper control, these electric air heaters are capable of maintaining temperatures +/- 1 Degree F.  It is possible to heat air to 1400 Deg F with one heater, 1500 Deg F with two heaters in series (as measured at exit of heater).  Osram Sylvania air heaters can accomplish these temperature because of a high efficiency element winding at the core of each heater.

Heaters are constructed to handle high pressure (150 psig); high flow, low pressure (800 SCFM) and most combinations in between. 

Click on the product or picture to see Specifications and Operating manual.  After viewing, use Back button on browser to return.

Application	Product	KW	Max Air Pressure (psi)	Key Features
Low Flow / Low kW	Series I, II, III	0.6 – 2.4	7	Basic heater with quartz insulator tube
	Hot Air Tool (HAT)	1.5 – 3.5	60	Built in "K" thermocouple
	G–Temp  Obsolete as of 12/31/04 - see replacement guide and recommendations	1.5 – 3.0	2	Built in manual control with burnout protection
	Serpentine II	2.0 – 3.6	25	Triple pass exchanger housing
	Serpentine IV	5.0 – 8.0	25	Triple pass exchanger housing
	Threaded Inline	1.6 – 18.0	150	For high-pressure applications
	Skorpion	1.5 - 4.5	3	Self contained system, SSR, temperature control and blower included.  Also available without blower
	Hot Air System   System obsolete 12/31/04, components discontinued 8/31/05 - see SureHeat Jet	3.0 – 8.0	100	Complete heating system with controls. Includes burnout protection
	SureHeat Jet	3.0 - 8.0	60	Better over temperature control, simplified wiring
	SureHeat Discontinued 8/31/05 - see SureHeat Max	6.0 – 36.0	10	New burnout protection. Great for use with blowers
	SureHeat Max	6.0 - 36.0	60	Better over temperature protection - same heater size as SureHeat
	SureHeat HT	30 (380V) 36 (480V)	60	Higher (up to 1600F) Temperatures, but does not have built in over temperature protection
	Flanged Inline	36.0 – 192.0	150	For high-pressure, high-flow applications. Includes burnout protection
High kW /  High Flow	UHP Flanged Inline Heater	Up to 400kW	Up to 800 psi	For High Flow, High Pressure applications.  Includes internal thermocouples to prevent failure due to insufficient air flow

Click on the product or picture above to view the operating manual.

Click here to view the 2004 Process Heat Catalog